petroleum production engineering theory for an integrated simulation
Hello,
I need someone to help me to write 7-10 pages of technical information related to integrated modelling and simulation of oil Fields that is going to be part of the Introduction section of a current project I’m doing. You may use the following list of concepts as a guide:
Components of Petroleum Production Systems
Volume and face if the reservoir hydrocarbons
Reservoir
o Deposition
o Fluid migration
o Accumulation
o Anticline
o Fault block
o Channel sand
Porosity
Reservoir height
Fluid Saturations
PVT Properties
Areal extent
Permeability
Completions and Near-wellbore zones
Well (type of lifting)
Surface equipment
Well productivity and Production Engineering
Objectives of Production Engineering
o Analysis of the rate-versus-pressure-drop relationship (productivity index) for the flow paths from the reservoir to the separator
o Well testing
o Production logging
Important issues of Production Engineering
Oilfield units
Petroleum Production Engineering Fundamentals
Petroleum Production System
Properties of Oil and Natural Gas
o Solution Gas-Oil Ratio (GOR)
o Density of Oil
o Formation Volume Factor of Oil
o Viscosity of Oil
o Oil Compressibility
o Specific Gravity of Gas
o Gas Pseudo-Critical Pressure and Temperature
o Viscosity of Gas
o Gas Compressibility Factor (Deviation or Z-factor)
o Density of Gas
o Formation Volume Factor of Gas
o Gas Compressibility
Reservoir deliverability
o Transient Flow
o Steady-State Flow
o Pseudo-Steady-State Flow
o Horizontal Well
o IPR for Single(Liquid)-Phase Reservoirs
o IPR for Two-Phase Reservoirs
o IPR for Partial Two-Phase Oil Reservoirs
o Composite IPR Models
 Single-Phase Flow
 Two-Phase Flow
 Partial Two-Phase Flow
o Vogel’s Method
o Fetkovich’s Method
Wellbore performance
o Liquid Holdup
o TPR Models
 Homogeneous-Flow Models
 Separated-Flow Models
o Average Temperature and Compressibility Factor Method
o Cullender and Smith Method
Choke Performance
o Subsonic Flow
o Sonic Flow
o Temperature at Choke
o Critical (Sonic) Flow
o Subcritical (Subsonic Flow)
Wellbore deliverability
o Analysis with the Bottom-Hole Node
 Gas Well
 Oil Well
o Analysis with Wellhead Node
 Gas Well
 Oil Well
o Deliverability of Multilateral Well
 Gas Well
 Oil Well
Forecast of Well Production
o Oil Production during Single-Phase Flow Period
o Oil Production during Two-Phase Flow Period
Production Decline Analysis
o Relative Decline Rate
o Production Rate Decline
o Cumulative production
o Determination of decline rate
o Effective decline rate
