final draft 2

What is required in the portfolio:

3 Rough Drafts (1 essay per prompt listed on the assignment sheet)

3 Final Drafts (3 rough drafts revised)

1 page letter explaining the difference between the final drafts and the rough drafts to me as your teacher.

  • address it to Prof. L as a letter
  • explain the process you went through as you wrote your rough drafts
  • explain the process you went through as you revised the rough drafts
  • explain the changes between the rough and final drafts
  • tell me what you thought about the process

Once you complete the portfolio, you will compile all documents into one.

Please copy and paste them into one document, so you have one submission.

Follow this order:

Letter

Rough Draft 1

Final Draft 1

Rough Draft 2

Final Draft 2

Rough Draft 3

Final Draft 3

Logistics: Essays are in third person and at least 500 words each

0.0pts

This criterion is linked to a Learning OutcomeAll three essays are included, with re-writes

0.0pts

This criterion is linked to a Learning OutcomeContent of Essays: Introductions grab attention, establish topic

0.0pts

This criterion is linked to a Learning OutcomeThesis clearly established with supporting points stated

0.0pts

This criterion is linked to a Learning OutcomeSupport for thesis is persuasive

0.0pts

This criterion is linked to a Learning OutcomeArticle(s) are referenced to enhance supporting points

0.0pts

This criterion is linked to a Learning OutcomeConclusions lower the curtain, dim the lights effectively

0.0pts

This criterion is linked to a Learning OutcomeSentence Level: Punctuation/Grammar poses no major distractions

0.0pts

This criterion is linked to a Learning OutcomeSentence syntax smooth, word choice clear

0.0pts

This criterion is linked to a Learning OutcomeProgress and Improvement: Evident throughout the course of the essay sequence.

0.0pts

This criterion is linked to a Learning OutcomeRe-writes demonstrate thoughtful revision and incorporate feedback

An interview with a bank manager report paper

requirement:

the interview report paper should include the following bullet point:

1. the reason why you chose to interview this individual (the bank manager)

2. questions you asked + answers. the format should be like the following:

Q: xxxxxxx?

A: xxxxxx… (please state them in the third person)

3. 2-3 things you learned from the interview (something you didn’t know before)

4. As a business students, will anything you learned from the interview be useful to your in your studies or future business career?

other requirement:

the interviewee is a bank manager

length of the whole interview paper — 2-3 pages

the three interview questions are:

1. As a business students, if I would like to get a job in the bank after I graduate, what kind of things do I need to prepare, such as some certain certifications, or internships, and which do you think is or are more important?

2. As a manager of the bank, what the necessary skills and characteristics should be mastered?

3. When you work with your team, did you have any conflicts during your termwork, and how did you settle the disput?

should we invest dell company nowadays ? (finance)

This paper is related to the valuation of Dell company, please follow the uploaded sample , but you don’t have to do transaction summary and investment thesis. Here are some questions need to answer, 1. why is the industry important to the world, dell is a multiple company so that you have to analyze two or three factors which the main income of dell. (key) 2. dell company overview (follow the sample) (key) 3. How attractive is the dell to potential investors (compared with competitors) 3. what kinds of risk investors need to take if put money on dell. 4. What are the positives and negatives of doing leverage buyouts in the IT industry? The case which I provided is very important to help you to build the frame structure especially in terms of company overview. By the way, you don’t have to do the valuation too, all you have to do is to answer the questions I mentioned above then combine with given template. In another word, constructing a frame to investors to help them to make economic decisions whether spend their capital on dell. In a word, the paper is more likely to a research paper that you need take some time.

Code of HammurabI Help me please

For this assignment, we’ll compare the Code of Hammurabi and the Torah in regards to the laws both documents established. 

First, please follow the steps below:

1.  Go to the online search engine, the Bible Gateway (www.biblegateway.com)

2. In the Search box, enter the keywords “eye for eye.”

3.  Select Old Testament. Please use the New International Version of the Bible. In this assignment we are interested only in results from the books of the Pentateuch or the Torah, Genesis, Exodus, Leviticus, Numbers, and Deuteronomy.

4. Using the same technique, search for the word “slave.”

5. Reread the Code of Hammurabi in your Andrea/Overfield text. Look for references to the phrase “eye for eye” and “slave.” 

6. Compare the references from the Torah with the passages in the Code of Hammurabi which also contain the same phase and word(s).

Second, answer the following questions:

  • How do those two sets of laws refer to the concept “eye for eye”?  What similarities and differences do you detect in this regard in the two texts?  What do those similarities and differences tell us about the societies, their laws, and development of civilizations in general?
  • In a similar fashion, please evaluate the two texts in reference to the word “slave.” What similarities and differences do you detect in this regard in the two texts?  What do those similarities and differences tell us about the societies, their laws, and development of civilizations in general?
  • Now, go back to your discussion on social justice in the Code of Hammurabi you submitted for the lesson on Mesopotamia.  Does the comparison with the Torah change your initial reaction to the social justice exercised through the Code of Hammurabi?  Please make sure to provide examples to support your answer.

This essays satisfies COLAs #6, #7, #8, and #11.

Guidelines for Writing your Essay

For this assignment, please use the following guidelines for writing your essay:

    1. Essays should each be two full typewritten pages in length, approximately 500-600 words in 12-point type. Please use a simple, clean font such as Times New Roman or Palatino. Use 1″ inch margins on all sides.
    2. Essays are to be written following the rules of correct grammar and spelling, both of which will be taken into consideration in the evaluation of the essay. Be sure to proofread your essays as grammar and spell checks typically do not catch words used in incorrect contexts.
    3. Essays must be original and analytical and must be careful to include well-thought-out responses to the questions posed in the assignment. Make sure to address ALL parts of the question.
  •  Introduction which does ALL of the following: states the purpose of the essay; frames the era by providing pertinent dates for the subject; provides a solid historical background moving from general statements about the subject to increasingly more specific ones; introduces the author of the document by providing some specific information important for better understanding why the author wrote what he or she did.
  • thesis which specifically explains how the primary document reflects the issues and developments of the historical period when it was produced.
  • methodology that states what topics are covered in the primary document and how you went about analyzing it; this means you will need to explain what your secondary sources were (don’t just say “the textbooks” that’s too vague) and how those sources were helpful
  • body of evidence, this is main part of your essay and it is where you defend your thesis by referring to several major aspects of the primary document explaining how they reflect the concerns and issues of author in the context of the period when it was written. You rely on direct analysis of the primary document and on secondary source material to back up your assertions.
  • conclusive summary that briefly reiterates your main points, but more important, suggests how the primary source points to later historical developments. How might it be a bridge to a later time in Greek history–do not just jump to the present and make a superficial remark about how everyone was better.

You must cite your sources in text and provide a complete bibliography at the end.  A minimum of three sources -in addition to your textbook- are required. REMEMBER:  Any information or idea that is not your own MUST BE CITED. 

    • You must give specific examples from the secondary and/or primary sources used in the development of the paper and must cite these sources following the MLA style, the University of Chicago Press’s Chicago Manual of Style or Kate L. Turabian’s A Manual for Writers of Term Papers, Theses, and Dissertations. You are required to utilize a minimum of three sources -in addition to your textbook- for this assignment.  Refer to the online resources Guide to the MLA Style or Turabian and Chicago Styles Citations. Your instructor will specify the preferred style. You should use footnotes or endnotes and provide a full bibliography at the end of your paper.
    • If you use direct quotations, you must not only cite your source, but must also use quotation marks. Example: Columbus explains that the weapons of the natives he encountered in the islands of the Caribbean were unsophisticated, and that their javelin, a much-used weapon, was “no more than sticks” joined together.

Please include the text and bibliography in one paper–not separate documents. 

External Analysis – 2-4 pages

“The client for our project is the JM Food Management LLC”

We are a team of 5 students doing an external analysis. My friend and I are doing an Industry Analysis and my part of the industry analysis is:

1- Competitors

2- Substitutes

only!

and that will be 2-4 pages

bellow is what is required for the whole external analysis. we will just focus on (substitutes and competitors) my group will take care of the rest.

Milestones 3: External Analysis

Are there important developments in the macro environment (e.g., deregulation,
demographic changes, stock market instability, dollar appreciation, Internet, etc.) that
may threaten or create opportunities for the firm? What is the power of the buyers and
suppliers relative to the firm? Are there substitute products? How intense is the
competition in the firm’s industry? Are there important developments within its
industry (e.g., increasing consolidation and merger activities) that could influence the
overall industry attractiveness and determinants of relative success (key success
factors)? What forces are emerging and are likely to permanently change the industry?

I also attached powerpoint slides from the chapter that were discussed in class you might find it helpful as well.

NPV with tax and discount rate, assignment help

You must show all work step by step. If you use excel, your formulas must be shown.

BOE Manufacturing is trying to decide between two different conveyor belt systems. System A costs $280,000, has a four-year life, and requires $85,000 in pretax annual operating costs. System B costs $396,000, has a six-year life, and requires $79,000 in pretax annual operating costs. Both systems are to be depreciated straight-line to zero over their lives and will have zero salvage value. Whichever project is chosen, it will not be replaced when it wears out. The tax rate is 35 percent and the discount rate is 9 percent.

Calculate the NPV for both conveyor belt systems. (Negative amounts should be indicated by a minus sign. Round your answers to 2 decimal places (e.g., 32.16).)

NPV
 System A $  
 System B $  

Which conveyor belt system should the firm choose?
System A
System B

Constructionist Theories of Deviance

This is meant to be an exercise to test your understanding of the Constructionist Theories of Deviance. In order to do this Discussion, you will need to have a good understanding of the theories.

Instructions

  • For this discussion posting you will need to watch one of the following video clips on an example of deviant behavior.
  • After watching your chosen clip from the links above, in 4-5 paragraphs explain the deviant behavior using either Labeling Theory, Phenomenological Theory, or Conflict Theory or two of the theories.
  • Be sure to use the elements of the theory in explaining the deviant behavior- not just your own thoughts.

paper after reading article

Length: 400 – 500 Words, double-spaced.

Please submit your papers electronically on TritonEd.

1. Kim Sa-ryang’s “Into the Light” (200-250 words)

Write an analysis of the following passages. First, analyze them separately and then connect your interpretation of each passage to one another.

But the next instant, I remembered that my current name was Minami, a fact that reverberated through my entire body like the peal of an electric bell. Instinctively, I scrambled to think of my usual array of excuses. But it was pointless.

At that point, in self-defense you might say, I tried to beat Yi at his own game. In that case, I argued, how the hell are you any different from the man at the oden stand who yells, “Hey everybody, I’m Korean!” the minute he gets sentimental or passionate about something. Ultimately there’s no difference between you and Yamada Haruo bawling that he’s not Korean, is there?

How sad she’d sounded when she said, I ‘m a Korean. From her perspective, maybe she took some sort of pride in being married to a mainland Japanese man and used that as her sole consolation for enduring this adversity. Actually I was hoping that she harbored intense hatred toward that Hanbei. As a fellow Korean, I wanted to revel in her righteous indignation. But boy did she turn the tables on me.

2. At the end of Lisa Nakamura’s article, she offers a close reading of Jennifer Lopez’s music video, “If You Had My Love.” First, summarize her main arguments. Then, respond to the points, concepts, and issues she raises by coming up with your own questions about her analysis of Lopez’s video. The summary part should be a bit shorter and the rest of your essay, consisting of questions, should be longer. (Total of 200-250 words) The two parts can be separated out or they can be integrated with each other. The second part should not be just simple enumeration of short questions but rather you should offer 2 or 3 longer questions where you explore a series of dimensions of an issue treated in her analysis of the video.

There are 8 more pages I will upload in a few.

Research Topic

PART 2 Assignment

Introduction

Topic area

Research question

Significance

Assignment details:

Based on your work from week 1 [improved by using any feedback received] continue to elaborate on your proposed research study.

Topic Area: Begin by stating the type of facility in which, or about which, the research will focus [for example: hospital, physicians’ office, urgent care center, etc.]

Then, follow with a strong introduction that will share a brief overview that will inform the reader about the specifictopic on which the research will focus. This section should also include a brief explanation of why the results are expected to be relevant to the facility, and its ability to be effective and efficient.

Research Question: Once the topic area is established, repeat and elaborate on what you wrote about your research question in week one’s assignment [improved by implementing any feedback, as necessary]. What specific issue or question will your work investigate? What can be learned from this research project?

Significance: Why is this study, and its statistically significant results, important to this facility and its ability to provide quality health care services? Explain why it will be beneficial to answer this question with facts. What are the implications of completing this study? How might these facts [statistically significant results] affect the policies and procedures of this facility? This section should also include why the reader should find value in the completion of the project.

Submit your original work on a Microsoft Word document . Estimated length: two-to-three pages

PART 3 Assignment

Literature review: State of current industry knowledge

Previous research: as currently available in peer-reviewed journals, government reports, accreditation agency research, etc.

Identify what specifics have been confirmed or denied by these previous studies, as they relate to your topic for this study

Assess what in the current industry (last 3-5 years), including laws and regulations, have changed since these previous studies were completed

Evaluate what updates or new components could possibly be addressed (unresolved or remaining questions) by your proposed research study

Assignment details:

The purpose of the literature review is to position your proposed research in the context of what is already known in the industry about this topic. This review does not need to be exhaustive, however it must be recent (within the last 3-5 years), so you can illustrate how this proposed study will benefit the whole; the facility, the sub-sector of the industry, and the health care system overall. It should provide the theoretical basis for your work, show what has been done in the area by others, and set the stage for your work.

In this literature review, you should give the reader a sufficient number of connections to existing, legitimate literature so that the reader can have confidence that you have found, read, and assimilated the current literature in the field. It is recommended that you include a paragraph that summarizes each article’s contribution to this topic area, along with your interpretation of the relevance to your study.

Unresolved or remaining questions: This is where you present the missing or outdated points in the knowledge that need to be plugged, and by doing so, establish the benefits of your proposed study’s results. This is the section of this proposal where you can establish that this study fits in and can potentially provide significance to the industry.

NOTE: Legitimate literature must be determined to be a valid credible source, including but not limited to websites from the US federal government [,gov], higher educational institutions [.edu], certain industry related non-profit organizations [.org]. Be cautious about using commercial websites [.com] and do not accept information without establishing the credibility of the author(s). Healthcare websites from systems and facilities in another country should be used very cautiously because they do not have the same health care systems nor the same laws and regulations governing these services. For example: .ca = Canada; .uk = United Kingdom, .au = Australia.

Submit your original work on a Microsoft Word document .Estimated length: three-to-five pages plus References page, as per APA formatting. A minimum of three (3) legitimate sources cited.

PART 4 Assignment

Methodology

Approach

Data collection

Data Analysis techniques

Plan for interpreting results

Assignment details:

Approach:This section should clearly explain whether your study will be conducted qualitativelyor quantitatively using what type of contact with participants, including the specific criteria that will make a participant eligible and then how you will recruit these eligible participants (e.g. online, in person, at a specific facility, etc.).

Data Collection: This might include the physical location description, the type of instrument (interview, survey questionnaire) you will use to collect relevant data. Be certain to address any obstacles to collecting data, such as patient consent or corporate approvals.

Statistical Analysis: Once you have collected the required statistically significant number of responses, you will need to organize and assess the results to determine the conclusions that can be drawn. Methods of analysis may include frequency analysis or chi square test while tools of analysis may include software programs such as SPSS or Excel.

Interpretation: Once the data collected has been analyzed, this portion of your proposal should indicate how the anticipated outcomes will be interpreted to answer the research question. It is extremely beneficial to anticipate the range of outcomes from your analysis, and to explain their meaning. For example, the term “majority” is not sufficient, you must include the level of majority that will make this determination significant, such as ± 0.05 or >25 or 57%.

Submit your original work on a Microsoft Word document to the appropriate Assignment link no later than Sunday, 11:59 pm. Estimated length: three-to-five pages.

PART 5 Assignment

Expected results

Possible Action Plans

Assignment details:

Expected Results: This section should provide an overview of what you expect the results to prove. It should join the data analysis and possible outcomes to the theory and questions that you have raised. It will be a good place to summarize the significance of the work.

Possible Action Plans: Once you have the results, theorize on how you might put this new knowledge into action to improve the facility’s service. For example, if you look at the example shared in the Week 1 assignment details investigating patient wait times, here, in this section, you might theorize action plans for both potential determinations: a) if the results show patients are waiting longer than other facilities of the same category [according to benchmarking analysis], we might look to make the admission process more efficient by providing patients with forms to complete, via email or patient portal, so they can arrive with these forms completed; improving triage protocols, or have staff check third-party payer eligibility and verification at least 24 hours prior to the appointment; or b) if the results show patients are not waiting an unreasonable length of time, we will construct a response for staff members to courteously respond to a complaint or developing ways to change the perception of time [ie. Television, fee WiFi, etc.].

Submit your original work on a Microsoft Word document to the appropriate Assignment link no later than Sunday, 11:59 pm. Estimated length: two-to-three pages.

PART 6 Assignment

Research Study Budget

References

Assignment details:

Research Study Budget:Your budget needs to itemize and estimate the costs for conducting and completing this study.

Be specific about each of the elements for which you will need money: staff hours/overtime, cost of special software, a statistician or other consultant, other supplies, transportation, etc.

Use employment sites, such as Indeed, to identify salary or hourly rates for staff members to work on the project. You can Google to find general rates for consultants, as well. Remember, even free sources, such as government or internal facility databases take time, which means you will need to pay someone to pull the data, organize, etc.

References: Collate all of your references into one cohesive reference list. Double-check for complete citations, using APA formatting. Need help? Consult Purdue Owl APA: https://owl.english.purdue.edu/owl/resource/560/01/

PART 7 Assignment

COMPLETE PROPOSAL

Put all of the sections of your Proposal – improved by incorporating feedback and help from the writing center. Proof read it. Run Microsoft’s Spelling and Grammar check. Read it through one more time.

please I need it today

For this problem you need to determine the correct height of a flagpole large enough to support the Star Spangled Banner flag that flies over Fort. McHenry. This flag is 30 by 42 feet in size. (We know that the ratio of the height of a flagpole to the width of any flag is 1 to 4.)

a. How tall will the flagpole need to be to support the Star Spangled Banner?
b. You have a model of Ft. McHenry that you need to add a flagpole to that would be proportional to the real pole at the fort. The ratio of the model is 1 inch to 10 feet.
c. You are given a model flagpole that is 8 inches tall; is this the correct size? If not, how tall does it need to be?
d. You have a model flag that is 5 by 6.3 inches. Are the model flag and original flag similar figures? If not, what would the model flag dimensions need to be? What is the scale factor?
e. What is the ratio of the perimeter of the model flag in comparison to the original flag?
f. What is the ratio of the area of the model flag in comparison to the original flag?
g. What is the relationship between the ratios of perimeter and area?